Why the injector clip matters more than it looks
The fuel injector clip is the small retainer that keeps the injector connector locked to the injector body. When it is cracked, missing, or stretched, the connector can work loose. That can cause an intermittent connection, a misfire, or a no-start condition. If you are chasing a rough-running 1.5T engine, check the clip before you replace the injector.
This guide covers the Genuine Honda Fuel Injector Clip (Honda Part Number 16451-5R1-J01), which is a factory replacement clip for the 1.5T engines in the 2016-2021 Civic, 2018+ Accord, and 2017-2022 CR-V. It focuses on when replacement makes sense and what the catalog does and does not confirm.
Signs you may need a Honda fuel injector clip replacement
These are the conditions that most often point to a worn or broken injector connector clip. Use them as a starting point, not a diagnosis.
- Visible cracks or missing tabs: A broken injector connector clip often shows a split in the plastic or a missing locking tab. If the connector pulls off with little resistance, the clip is not doing its job.
- Intermittent misfire or rough idle: A loose connector can cause a cylinder to cut in and out. If the misfire changes when you wiggle the injector connector, the clip is a likely suspect.
- Connector that will not stay seated: If the electrical connector keeps backing off the injector, the retaining clip may be stretched or damaged.
- Clip damaged during injector service: Clips are easy to break when removing or installing injectors. If you are already in there for injector work, inspect the clip before reinstalling.
Which Civic, CR-V, and Accord models this clip fits
The Genuine Honda Fuel Injector Clip is listed for the 1.5T engine in the 2016-2021 Honda Civic, 2018+ Honda Accord, and 2017-2022 Honda CR-V. The catalog states it fits all variant models, including CVT, 10AT, 6MT, RHD, and international models. That broad fitment is useful because the clip is tied to the engine and injector connector, not to the transmission or market.
If your car is outside those year ranges or has a different engine, do not assume this clip fits. The catalog does not list other applications, so verify your part number before ordering.
Fitment and part number at a glance
- Genuine Honda Fuel Injector Clip - Civic / CR-V / Accord: Fits all 2016-2021 Honda Civic 1.5T Confirms the Civic 1.5T year range this clip is intended for.

Genuine Honda Fuel Injector Clip - Civic / CR-V / Accord - Genuine Honda Fuel Injector Clip - Civic / CR-V / Accord: Fits all 2018+ Honda Accord 1.5T Covers the Accord 1.5T application, including later model years.
- Genuine Honda Fuel Injector Clip - Civic / CR-V / Accord: Fits all 2017-2022 Honda CR-V 1.5T Covers the CR-V 1.5T application for the listed years.
- Genuine Honda Fuel Injector Clip - Civic / CR-V / Accord: Factory replacement fuel injector clip, Honda Part Number 16451-5R1-J01 The part number is the most reliable way to confirm you are ordering the correct clip.
How to replace the clip without damaging the connector
The supplied catalog does not include a full factory procedure, torque values, or safety instructions. The steps below are general guidance for handling the clip and connector; follow the service information for your specific engine before you start.
- Let the engine cool and relieve fuel pressure: Fuel system work carries fire risk. Follow the manufacturer's procedure for relieving pressure before you touch the injector connector.
- Release the connector lock: Do not pry or twist the connector. Locate the locking tab and release it as designed so you do not break the connector housing.
- Remove the old clip: A broken injector connector clip may come out in pieces. Keep track of any fragments so they do not fall into the engine bay.
- Fit the new Genuine Honda clip: Seat the clip on the injector and connector, then push the connector on until it clicks or locks. Confirm the clip is fully engaged before moving on.
- Reconnect and check: Reconnect the electrical connector, start the engine, and check for a secure fit. If the connector still feels loose, stop and inspect for damage to the connector or injector.
What the catalog does not confirm
The supplied information does not include a torque specification, a required replacement interval, or a step-by-step factory procedure for the clip. It also does not confirm whether the clip is reusable after removal. Treat any clip that is cracked, stretched, or missing a tab as a replacement item rather than reinstalling it.
The catalog does not list clip material, color, or quantity per package beyond the Standard variant. If you need more than one clip, confirm the package quantity before ordering.
When to replace the whole connector instead
The Genuine Honda clip is a retainer, not a repair for the wiring harness. If the connector housing is cracked, the wires are pulled out of the pins, or the locking feature on the connector itself is broken, a new clip may not solve the problem. In that case you need to repair or replace the connector pigtail, which is a separate job from a clip replacement.
If you are unsure whether the clip or the connector is at fault, inspect both before ordering. A clip is inexpensive, but it will not fix a damaged connector body.


