How to Install a PRL Garage Flag on Your Honda

Quick answer

Mount your PRL Garage Flag using the built-in grommets and a simple hook or screw setup. Secure it to a wall stud or ceiling joist for best results, and take it down before washing to avoid fading.

Installation steps

1. Choose your mounting spot: Pick a wall or ceiling location where the flag will hang flat without rubbing against tools or shelves. Use a stud finder to mark a stud or joist for the most secure mount. Avoid mounting on drywall alone; the grommets can tear out if the flag is bumped.
2. Install hooks or screws: Drive two screws or cup hooks into the stud or joist, spaced about 2.5 feet apart to match the flag's top grommets. Leave the heads protruding about 1/2 inch so the grommets slide on easily. Space the hooks slightly narrower than the grommets to keep the flag taut.
3. Hang the flag: Slip the top grommets over the hooks. Let the flag hang freely and check that it's level. For a cleaner look, tuck the bottom edge behind a shelf or use a second set of hooks for the bottom grommets. If the flag sags in the middle, add a third hook under the center grommet.
4. Care and cleaning: Remove the flag from the hooks before washing. Machine wash cold on gentle, then hang to dry. Do not bleach or iron, as polyester can melt or discolor. Washing while mounted can stretch the fabric or damage the grommets.

What you need

• PRL Garage Flag: 3ft x 5ft polyester garage flag with grommets for easy hanging. The grommets let you mount the flag on hooks, nails, or screws without sewing or clips, and the polyester material resists mild moisture better than cotton.