Two paths to the same 76mm inlet
If you are shopping for a 2023+ Acura Integra 1.5T turbo inlet pipe, PRL Motorsports offers two distinct paths: a complete titanium inlet pipe kit and a carbon fiber tube-only option that swaps the crossover pipe on an existing titanium kit. They are not competing standalone products. The titanium kit is the foundation; the carbon fiber tube is a material change for drivers who already own the titanium kit and want to alter heat management or engine bay appearance.
This comparison focuses on what the catalog confirms about each option so you can decide which one matches your current setup and goals.
What each option actually includes
- 2023+ Acura Integra 1.5T Titanium Turbocharger Inlet Pipe Upgrade Kit: The PRL Titanium Turbocharger Inlet Pipe Kit includes a cast aluminum inlet piece, titanium crossover pipe, high-temp silicone couplers, vacuum hoses, and clamps. This is the complete hardware needed to replace the factory inlet pipe on a 2023+ Integra 1.5T.

2023+ Acura Integra 1.5T Titanium Turbocharger Inlet Pipe Upgrade Kit - PRL Motorsports Matte Carbon Fiber Inlet Pipe – Tube Only - 2022+ Honda Civic / 2023+ Acura Integra 1.5T (11th Gen): The PRL Carbon Fiber Inlet Pipe – Tube Only includes just the 76mm OD carbon fiber inlet pipe. It is a direct replacement tube for the titanium kit and reuses your existing PRL hardware, fittings, and couplers.

PRL Motorsports Matte Carbon Fiber Inlet Pipe – Tube Only - 2022+ Honda Civic / 2023+ Acura Integra 1.5T (11th Gen)
Compatibility: the carbon fiber tube is not a standalone kit
The titanium kit is a direct bolt-on upgrade for the 2022+ Honda Civic 1.5T and 2023+ Acura Integra 1.5T, including Si, CVT, 6MT, RHD, and international models. It requires a PRL High Volume Intake, Cobra Cold Air Intake, or Short Ram Intake. No ECU calibration is required.
The carbon fiber tube-only option is far more restrictive. It requires an existing PRL Titanium Inlet Pipe Kit (part number PRL-HC11-15T-INT-TIP-HVI) and is only compatible with a PRL High Volume Intake or PRL Short Ram Intake. It does not fit the OEM airbox and cannot be used as a standalone kit. If you do not already have the titanium kit, the carbon fiber tube is not a valid starting point.
Material and heat: titanium vs carbon fiber
- Titanium kit: Thin-wall titanium construction helps reduce heat soak. The cast aluminum inlet piece provides a smooth transition from the compressor inlet to a 76.2mm OD / 74mm ID outlet.
- Carbon fiber tube: Thin-wall carbon fiber reduces weight and lowers heat soak compared to the titanium crossover pipe. It maintains the same 76.2mm OD for high-flow performance.
Performance and tuning: what the catalog says
- Airflow volume: The titanium kit is designed to increase airflow volume compared to the factory inlet pipe while maintaining velocity, complementing the 1.5L displacement.
- ECU calibration: Neither the titanium kit nor the carbon fiber tube requires ECU recalibration or tuning.
- Gains: The catalog does not provide specific horsepower or torque gains for either option. Any claims would need to come from your own datalogging or dyno testing.
Which one should you buy?
If you are starting from a stock 2023+ Integra 1.5T and want a complete inlet upgrade, the titanium kit is the only option of the two that works as a standalone purchase. It includes all necessary hardware and is a direct bolt-on for the factory turbocharger and factory replacement drop-in turbocharger upgrades.
If you already run the PRL Titanium Inlet Pipe Kit and want to reduce weight or change the engine bay look, the carbon fiber tube-only option lets you swap just the crossover pipe without replacing the entire system. It is a simple swap that reuses your existing PRL hardware, fittings, and couplers.
Neither option is compatible with the OEM airbox, so you will need a PRL intake system either way. The carbon fiber tube is not a cheaper way into the PRL inlet ecosystem; it is a finishing piece for an existing titanium kit.
At a glance: key specifications
- 2023+ Acura Integra 1.5T Titanium Turbocharger Inlet Pipe Upgrade Kit: 76.2mm OD / 74mm ID outlet; thin-wall titanium; cast aluminum inlet piece; patent pending. These dimensions define the high-flow path and are shared with the carbon fiber tube.
- PRL Motorsports Matte Carbon Fiber Inlet Pipe – Tube Only - 2022+ Honda Civic / 2023+ Acura Integra 1.5T (11th Gen): 76mm OD carbon fiber pipe; reuses existing PRL hardware; no ECU recalibration required. The carbon tube maintains the same flow diameter while changing material and weight.



