Wireless Phone Charger Install for Honda Accord & Acura TLX
By PRL Motorsports - Premium Automotive Performance Products | Published: 2026-10-30
Category: How-to Guides
Step-by-step guide to installing a genuine wireless phone charger in your 2018+ Honda Accord or 2021+ Acura TLX. Includes fitment tips and common mistakes to avoid.
Quick answer
Installing a genuine wireless phone charger in your 2018+ Honda Accord or 2021+ Acura TLX is a straightforward DIY project that requires basic hand tools and about 30 minutes. This guide covers the specific steps for each model, including the optional charger attachment for the TLX.
Why choose a genuine charger?
Genuine Honda and Acura wireless chargers are designed to fit seamlessly into your vehicle's existing wiring and trim. Aftermarket chargers may require cutting or splicing, which can void warranties or cause electrical issues. The factory part numbers (08U58-TVA-110 for Accord, 08U58-TGV-200 for TLX) ensure correct fitment across all variant models, including RHD and international versions.
What you'll need
For the Accord charger (Part 08U58-TVA-110), you'll need a trim removal tool or a flathead screwdriver wrapped in cloth, and a T20 Torx driver. The TLX charger (Part 08U58-TGV-200) requires the same tools plus the optional Wireless Charger Attachment (Part 08U58-TGV-210A) if you want to charge phones without a cable. The attachment is sold separately and snaps onto the charger base.
Installation steps
- Disconnect the battery: Remove the negative battery terminal to prevent any electrical shorts while working near the center console or dash. Always disconnect the battery first—skipping this can damage the vehicle's electronics.
- Remove the trim panel: For the Accord, use a trim tool to gently pry off the center console side panel near the USB port. For the TLX, remove the small storage tray in the center console by pulling straight up. Work slowly to avoid breaking plastic clips. If a clip resists, use a heat gun or hair dryer on low to soften the plastic.
- Unplug the old charger (if replacing): Disconnect the wiring harness from the back of the existing charger by pressing the release tab and pulling straight out. If this is a new installation, locate the pre-wired connector tucked behind the trim. Do not force the connector—if it doesn't release, press the tab more firmly. Twisting can break the locking mechanism.
- Install the new charger: Snap the new charger into the mounting bracket until it clicks. Reconnect the wiring harness, ensuring the connector is fully seated and the locking tab engages. Double-check that the connector clicks into place—a loose connection can cause intermittent charging.
- Attach the wireless charger attachment (TLX only): If you have the TLX and purchased the Wireless Charger Attachment (Part 08U58-TGV-210A), align it with the charger base and press down until it snaps into place. The attachment sits flush against the charger surface. The attachment is optional—you can skip this step if you prefer to use a cable.
- Reinstall the trim and test: Snap the trim panel or storage tray back into place. Reconnect the battery, start the vehicle, and place a compatible phone on the charging pad to verify it charges. If the phone doesn't charge, check that the charger is properly connected and that your phone supports Qi wireless charging.
Product facts
- Genuine Honda Accord 2018+ Wireless Cell Phone Charger: Fits all 2018+ Honda Accord variant models including RHD and International Models. Honda Part Number 08U58-TVA-110. You don't need to worry about regional differences or special adapters—this charger is guaranteed to fit your specific Accord.
Genuine Honda Accord 2018+ Wireless Cell Phone Charger - Genuine Acura 2021+ TLX Wireless Cell Phone Charger: Fits all 2021+ Acura TLX variant models. Factory replacement/upgrade wireless phone charger. Part Number 08U58-TGV-200. The TLX charger is a direct OEM replacement, meaning it uses the same mounting points and electrical connectors as the original equipment.
Genuine Acura 2021+ TLX Wireless Cell Phone Charger - Genuine Acura Wireless Cell Phone Charger Attachment: Fits all 2021+ Acura TLX. Factory wireless charger attachment. Part Number 08U58-TGV-210A. This attachment adds wireless charging capability to the TLX's factory charger, so you can charge without plugging in a cable.
