ブログに戻る
比較 2026-11-21 PRL Motorsports - Premium Automotive Performance Products 0 ビュー

PTP Lava Blanket vs Turbo Blanket: Key Differences

PTP Lava Blanket vs Turbo Blanket: Key Differences

Compare the PTP Lava Inlet Pipe Blanket for Civic Type-R FK8 and the PTP X PRL Black Lava Turbocharger Blanket for 1.5T models to decide which heat shield suits your setup.

What These Two Heat Shields Do

PTP offers two heat management products for turbocharged Honda and Acura models. The PTP 2017-2021 Honda Civic Type-R FK8 Lava Inlet Pipe Blanket and the PTP X PRL 2022+ Honda Civic 1.5T Black Lava Turbocharger Blanket both use the same lava rock outer fabric and calcium magnesium silicate wool insulation. However, they target different hot spots under the hood. Choosing the right one depends on your engine platform and where you want to contain heat.

Product at a Glance

  • PTP 2017-2021 Honda Civic Type-R FK8 Lava Inlet Pipe Blanket: Fits all 2017-2021 Civic Type-R FK8, including RHD and international models. Designed to limit heat transfer from the turbocharger to the inlet pipe, cooling intake air before it enters the turbo. If you drive an FK8, this blanket addresses a specific heat-soak point near the turbo, not the turbo itself.
    PTP 2017-2021 Honda Civic Type-R FK8 Lava Inlet Pipe Blanket
    PTP 2017-2021 Honda Civic Type-R FK8 Lava Inlet Pipe Blanket
  • PTP X PRL 2022+ Honda Civic 1.5T Black Lava Turbocharger Blanket: Fits 2016-2021 Civic 1.5T, 2022+ Civic 1.5T, 2017-2022 CR-V 1.5T, 2018+ Accord 1.5T, and 2023+ Acura Integra 1.5T. Isolates heat from the turbocharger to reduce turbo lag, lower intake temps, and protect under-hood components (up to 60% under-hood heat reduction). This is a direct turbo blanket for the 1.5T family, wrapping the turbo housing itself to keep exhaust heat contained.
    PTP X PRL 2022+ Honda Civic 1.5T Black Lava Turbocharger Blanket
    PTP X PRL 2022+ Honda Civic 1.5T Black Lava Turbocharger Blanket

Key Differences Between the Two Blankets

The main difference is where each blanket sits. The Inlet Pipe Blanket wraps the pipe that carries air into the turbo, while the Turbocharger Blanket wraps the turbo housing itself. Both use the same material layers, but their application changes what they achieve.

  • Target area: Inlet Pipe Blanket: shields the inlet pipe from radiant turbo heat. Turbocharger Blanket: wraps the turbo to keep exhaust heat inside the hot side.
  • Compatible models: Inlet Pipe Blanket: 2017-2021 Civic Type-R FK8 only. Turbocharger Blanket: 2016+ Civic 1.5T, CR-V 1.5T, Accord 1.5T, Acura Integra 1.5T.
  • Performance goal: Inlet Pipe Blanket: cooler intake air entering the turbo. Turbocharger Blanket: reduced turbo lag, cooler intake temps, up to 60% under-hood heat reduction, potential horsepower gain.
  • Construction: Both use pulverized volcanic lava rock outer layer (rated 1800°F direct / 2500°F radiant), calcium magnesium silicate wool insulation (rated 1832°F continuous / 2300°F peak), and stainless steel mesh overlay.

Which One Should You Choose?

If you own a 2017-2021 Civic Type-R FK8, the Inlet Pipe Blanket is the model-specific solution for that engine bay layout. For any 1.5T Honda or Acura (including the latest 2022+ Civic), the Turbocharger Blanket gives broader compatibility and wraps the turbo directly. Both are hand-crafted in North America and use the same high-temperature materials, so your choice comes down to fitment and the exact heat source you want to manage.

The supplied information does not confirm whether one blanket can be used on the other platform, nor does it provide installation instructions. If you are unsure which part your engine needs, consult your vehicle service manual or a qualified installer.

関連記事

Customer Service
ホーム
商品
カート
マイページ