Genuine Honda Emblem Replacement Guide for Civic Type R

Quick answer

Replacing the emblems on your Civic Type R FK8 with genuine Honda parts restores a factory-fresh look. This guide covers removing the old badge and installing the red H emblem or Type-R emblem on the rear hatch or front grille.

Step-by-step emblem replacement

1. 1. Heat the old emblem: Use a heat gun or hair dryer on medium setting to warm the emblem for 2-3 minutes. This softens the factory adhesive, making removal easier and reducing the risk of paint damage. Do not overheat one spot; keep the heat source moving to avoid blistering the clear coat.
2. 2. Remove the old emblem: Slide fishing line or dental floss behind the emblem and use a sawing motion to cut through the adhesive. Gently pry the emblem off with a plastic trim tool. If resistance remains, reapply heat. Avoid using metal tools that can scratch the paint. Work slowly to prevent bending the emblem.
3. 3. Clean the surface: Remove all adhesive residue using isopropyl alcohol and a microfiber cloth. The surface must be completely clean and dry before installing the new emblem. Any leftover residue will prevent the new emblem from sticking properly and may cause it to lift.
4. 4. Apply new emblem tape: Peel the backing from the pre-applied double-sided tape on the new genuine Honda emblem. If the tape is missing or damaged, use automotive-grade emblem tape cut to size. Ensure the tape covers the entire back of the emblem to prevent moisture from getting underneath.
5. 5. Position and press the new emblem: Align the emblem to its original location using the surrounding body lines as a guide. Press firmly for 30 seconds, then apply pressure for an additional minute. Check alignment before pressing down fully; once the tape bonds, repositioning is difficult.
6. 6. Allow adhesive to cure: Wait at least 24 hours before washing the car or driving at highway speeds. This gives the tape time to achieve full bond strength. Avoid pressure washing the emblem area during the cure period.

Genuine Honda emblems for your Civic Type R

• Genuine Honda Civic Type-R FK8 Red "H" Emblem 2017-2021 Rear or 2020-2021 Front: Fits all 2017-2021 Civic Type R FK8 (rear) and 2020-2021 (front). Sold as a single badge. Honda part number 75701-TGH-A01. One badge works for both positions, simplifying ordering if you plan to replace front and rear red H emblems.

  

• Genuine Honda Civic Type-R FK8 "Type-R" Rear Emblem: Fits all 2017-2021 Civic Type R FK8 rear bumper or hatch. Honda part number 75723-TGH-A01. Direct replacement for the factory Type-R emblem, available separately if you only need to replace that specific badge.