Honda Ridgeline Bed Tent Installation Guide
By PRL Motorsports - Premium Automotive Performance Products | Published: 2026-10-29
Category: 操作指南
Learn how to install the Genuine Honda Ridgeline Bed Tent on your 2017+ model. Step-by-step instructions for a secure camping setup.
Quick Answer
Installing the Genuine Honda Ridgeline Bed Tent on your 2017+ Ridgeline is straightforward: unfold the tent in the truck bed, secure the poles, and attach the straps. The tent is designed to work with the In-Bed Trunk and side storage, so you don't lose access to those features.
Why Choose the Genuine Honda Ridgeline Bed Tent?
The Genuine Honda Ridgeline Bed Tent is custom-designed to fit the Ridgeline's bed, unlike universal truck tents that may not align with the bed's contours. It allows access to the In-Bed Trunk and side storage, which is a key advantage for camping trips where you need to grab gear without exiting the tent.
A common trade-off is that the tent takes up the entire bed, so you cannot carry other large items while it is set up. Plan to install it only when you are ready to camp.
Installation Steps
- 1. Prepare the Truck Bed: Clean the bed floor and remove any debris or accessories. Lower the tailgate completely. If you have a tonneau cover or bed mat, remove them for a flat surface. A clean, flat surface prevents damage to the tent floor and ensures a snug fit.
- 2. Unfold the Tent and Position It: Remove the tent from its storage bag and unfold it on the ground next to the truck. Identify the front and rear of the tent (the front has a smaller window for cab access). Place the tent into the bed with the front facing the cab. Check the tent's orientation before you start assembling poles to avoid rework.
- 3. Assemble and Insert the Poles: Connect the fiberglass poles according to the color-coded sleeves. Insert each pole into the corresponding sleeve on the tent body. Slide the pole ends into the grommets at the corners of the bed. A common mistake is forcing a pole into the wrong sleeve—match the colors. Work from one corner to the opposite corner to keep tension even.
- 4. Secure the Tent to the Bed: Attach the hook-and-loop straps around the bed tie-downs or under the bed rails. Tighten the straps so the tent is taut but not overstretched. Ensure the tailgate area is sealed by tucking the tent flap under the tailgate seal. Loose straps cause flapping in wind; too tight can stress the seams.
- 5. Access the In-Bed Trunk and Cab Window: The tent includes zippered panels that align with the In-Bed Trunk and the rear cab window. Unzip these panels only when you need access, and re-zip them to keep insects out. Always close the trunk panel before driving—even a short move—to avoid damaging the tent.
Product Facts
- Genuine Honda 2017+ Honda Ridgeline Bed Tent: Fits all 2017+ Honda Ridgeline models including RHD and international variants. You don't need to worry about compatibility regardless of your Ridgeline's configuration.
Genuine Honda 2017+ Honda Ridgeline Bed Tent
