PRL Motorsports - Premium Automotive Performance Products

2022+ Civic / Integra 1.5T 終極冷卻套組

2022+ Civic / Integra 1.5T 終極冷卻套組 - Main image
$949 $1300 In stock

Category: Intercoolers & Charge Pipes

可靠動力始於真正散熱

如果您正在提升增壓值、加裝改裝件,或只是對您的11代Civic或全新Integra要求更高,您的冷卻系統就必須跟上。因此,我們將 PRL Intercooler Upgrade 與 CSF High Performance Radiator組合在一起——這是一套直上組合,解決了L15平台上兩個最關鍵的限制。

說實話——原廠的中冷器和散熱器並非為長期激烈使用而設計。熱衰、進氣溫度升高以及冷卻液溫度不穩定,都會削弱您愛車的動力和可靠性。PRL的中冷器升級套件可大幅降低進氣溫度並支援顯著的氣流,而CSF的散熱器則以2排鋁製核心帶來賽車級冷卻效率。兩者結合,您便擁有一套能幫助您的1.5T保持更低溫度、更快恢復、並更強勁運行的配置——每一次都是如此。

此套件專為應對激烈日常駕駛、賽道日或介於兩者之間的任何需求而設計。而且,當您一起購買時,還能省錢。

包含項目

PRL Intercooler Upgrade (適用於2022+ Civic 1.5T 及 2023+ Integra 1.5T)

  • 3.9英吋厚、高效能條板式核心

  • 使用原廠進氣管路直接螺栓固定

  • 顯著降低負載下的進氣溫度

  • CNC加工進/出口法蘭,確保精準密合

  • 支援高馬力改裝,同時提升原廠設定的穩定性

  • 無需調校

CSF High Performance Radiator (適用於2022+ Civic 1.5T)

  • 42mm雙排鋁製核心,提升冷卻能力

  • TIG焊接水箱端蓋,確保強度與耐用性

  • 完全相容於原廠護罩、風扇及水管

  • 適用於高溫駕駛條件及增加的引擎負載

  • 直接替換——無需切割或修改

適用車型

  • 2022+ Honda Civic 1.5T (FE/FL平台)

  • 2023+ Acura Integra 1.5T

  • 100% 直上,相容原廠硬體

付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.4 / 5 · 5 reviews)

David ★★★★★

Finally got this installed on my 11th gen Civic and the difference in throttle response is immediate. The charge pipe routing is super clean and everything bolted up without any modifications needed. Definitely glad I went with this kit over piecing together parts.

Amelia I. ★★★★★

This kit dropped my charge temps significantly even in stop-and-go traffic. The intercooler core is noticeably thicker than stock and fit behind the bumper without any trimming. My boost holds steadier on hot days now.

Edward S. ★★★★☆

Install took a little longer than expected, but once everything was lined up the charge pipes fit perfectly with no rubbing. Already seeing cooler intake temps on my datalogs after a few hard pulls.