Why Replace the Factory Intake Hose?
The factory intake hose on the 2018-2022 Honda Accord 2.0T uses a corrugated design with pleats that disrupt airflow. According to PRL Motorsports, these pleats limit power potential and throttle response. The PRL Motorsports silicone intake hose kit replaces that corrugated hose with a smoother-flowing 4-ply silicone hose, which the company says offers great gains at an affordable price. This kit is a direct replacement and, importantly, requires no ECU calibration.
What You Get in the Kit
- 2018-2022 Honda Accord 2.0T Silicone Intake Hose Kit: Kit includes (1) 4-ply silicone intake hose and (1) injection molded EVAP fitting. These are the core components you'll install; the EVAP fitting ensures proper connection to the emissions system.

2018-2022 Honda Accord 2.0T Silicone Intake Hose Kit - 2018-2022 Honda Accord 2.0T Silicone Intake Hose Kit: Includes (4) 304 stainless steel worm clamps. Stainless steel clamps resist corrosion and provide secure sealing for the silicone hose.
Fitment: Which Accords Does This Kit Fit?
This kit fits all 2018-2022 Honda Accord 2.0T models, including 10AT, 6MT, RHD, and international variants. That broad compatibility means you can install it regardless of your transmission or market. Before you start, confirm your Accord is a 2.0T model, as this kit is not designed for other engines.
Installation Tips for a Smooth Fit
- 1. Gather your tools: You'll need basic hand tools to remove the factory hose and tighten the clamps. The kit includes four stainless steel worm clamps, so no additional clamps are required.
- 2. Remove the factory hose: Loosen the clamps securing the corrugated factory hose and carefully disconnect any fittings, including the EVAP line. Keep track of the EVAP connection point.
- 3. Install the silicone hose: Position the 4-ply silicone hose in place of the factory unit. The smoother interior promotes better airflow. Ensure the hose is fully seated on both ends.
- 4. Secure with clamps: Use the supplied 304 stainless steel worm clamps to tighten the hose at each connection. Tighten them evenly to avoid leaks, but do not overtighten, as this can damage the silicone.
- 5. Reconnect the EVAP fitting: Attach the injection molded EVAP fitting to the new hose and reconnect the EVAP line. This ensures the emissions system remains functional.
- 6. Final check: Double-check all connections and clamps. Start the engine and listen for any unusual sounds or leaks. No ECU calibration is required, so you can drive immediately after installation.
Caring for Your Silicone Intake Hose
Silicone hoses are durable, but a little care goes a long way. Regularly inspect the hose for signs of wear, such as cracks or abrasions, especially at the clamp points. Keep it clean by wiping it with a mild soap and water solution; avoid harsh solvents that can degrade silicone. Check the clamps periodically to ensure they remain tight, as vibrations can loosen them over time. With proper care, your PRL Motorsports silicone hose should provide reliable service for years.
Product Details at a Glance
- 2018-2022 Honda Accord 2.0T Silicone Intake Hose Kit: Fits all 2018-2022 Honda Accord 2.0T models, including 10AT, 6MT, RHD, and international variants. Confirms compatibility with your specific Accord, so you can install with confidence.
- 2018-2022 Honda Accord 2.0T Silicone Intake Hose Kit: No ECU calibration required. You can install this kit without needing a tune, saving time and money.
What the Catalog Does Not Confirm
The supplied information does not include torque specifications for the clamps or detailed step-by-step instructions. For those specifics, consult a service manual or a qualified mechanic. Also, while the kit is described as offering 'great gains,' no specific horsepower or torque numbers are provided. Be cautious of expecting dramatic performance increases without supporting data.


