Tips & Care 2026-11-15 PRL Motorsports - Premium Automotive Performance Products 0 views
NGK ILZKAR8J8SY Heat Range 8: Your Spark Plug Questions Answered
Get clear answers on the NGK ILZKAR8J8SY spark plug, its heat range 8, fitment for Civic Si, CR-V and RDX, gapping, and when to replace iridium plugs.
NGK ILZKAR8J8SY Heat Range 8: Common Questions
What does heat range 8 mean on the NGK ILZKAR8J8SY?
In NGK's numbering, a higher number denotes a colder plug that transfers heat away from the firing tip more quickly. Heat range 8 is a colder grade than the lower numbers you'll see in many naturally aspirated engines, and it's the grade Honda specified for the turbocharged 1.5T and 2.0T applications this plug covers. The right heat range keeps the tip hot enough to resist fouling but not so hot that it becomes a pre-ignition risk under boost.
Which vehicles does the ILZKAR8J8SY fit?
The catalog lists fitment for all 2017–2021 Civic Si 1.5T, all 2017+ CR-V 1.5T, and all 2019+ Acura RDX 2.0T, including RHD and international variants. That's the supported list; if your car isn't on it, don't assume this plug is the correct one.
Is this the same as the Honda factory plug?
Yes—this is the OE direct replacement. The Honda part number is 12290-5PA-A01 and the NGK part number is 95660. The plug is an NGK Laser Iridium design with a laser-welded iridium center electrode tip and a platinum disc on the ground electrode, and it's the original-equipment-approved design for these engines.
How many plugs do I need to order?
The product is a single spark plug; pricing is for one quantity. These are four-cylinder engines, so a full set means four plugs. Order four if you're servicing the whole engine at once.
Is the plug pre-gapped, and do I need to check it?
The catalog states the plug is pre-gapped at 0.030" (factory specification) and recommends double-checking the gap for safety and engine protection. For high-boost or high-power engines, gapping and indexing are recommended for optimal use. Treat the pre-gap as a starting point, not a guarantee that the gap survived shipping.
What gap should a Civic Type R run?
The supplied information covers the 2017–2021 Civic Si, 2017+ CR-V, and 2019+ Acura RDX—it does not list a Civic Type R application or a Type R-specific gap. Don't transfer the 0.030" figure to a Type R without confirming the correct plug and gap for that engine. If you're unsure, check the under-hood emissions label or consult a Honda service manual for your specific model year.
When should I replace NGK iridium plugs?
The catalog describes these plugs as having a long service life but does not give a replacement interval. Iridium plugs generally outlast copper and platinum plugs, but the correct interval for your car is the one Honda publishes for your model and engine. Use that as your guide rather than a generic number.
Do these plugs support modified or high-boost engines?
The catalog says the plugs are intended for all power goals and that gapping/indexing is recommended for optimal use on high-boost/high-power engines. That's the supported position: the plug is not limited to stock power, but modified engines benefit from checking gap and indexing.
Product reference
Genuine Honda (NGK) Laser Iridium Spark Plug ILZKAR8J8SY Heat Range 8: Genuine Honda (NGK) Laser Iridium Spark Plug ILZKAR8J8SY, Heat Range 8 — Honda part number 12290-5PA-A01, NGK part number 95660. Cross-reference these numbers to confirm you're getting the correct OE plug for your engine.
Genuine Honda (NGK) Laser Iridium Spark Plug ILZKAR8J8SY Heat Range 8
Genuine Honda (NGK) Laser Iridium Spark Plug ILZKAR8J8SY Heat Range 8: Fits all 2017–2021 Civic Si 1.5T, all 2017+ CR-V 1.5T, and all 2019+ Acura RDX 2.0T, including RHD and international variants. Use this supported fitment list to decide whether this plug applies to your car before ordering.
Genuine Honda (NGK) Laser Iridium Spark Plug ILZKAR8J8SY Heat Range 8: Pre-gapped at 0.030" (factory specification); double-checking the gap is recommended, and gapping/indexing is recommended for high-boost/high-power engines. The pre-gap is a starting point—verify it before installation, especially on modified engines.