Start with the right kit for your 10th-gen Civic
The genuine Honda red ambient illumination kit adds a soft red glow to the driver and passenger footwells and is designed to integrate with the car's interior lights. Before you plan any wiring, confirm that the kit matches your car. The catalog lists fitment for 2017-2021 Civic Sport and Si, 2017-2021 Civic Type R FK8, and all variant models including RHD and international models. That covers a wide range of 10th-gen cars, but the catalog does not list trims outside Sport, Si and Type R, so check your own trim before ordering.
The kit is identified as factory Honda interior illumination lighting with part number 08E10-TEA-100A. That part number is the most reliable way to confirm you are looking at the genuine accessory rather than a universal aftermarket strip.
What the genuine Honda kit includes and fits
- Genuine Honda 2016-2021 Civic / Type-R Interior Ambient Illumination Lighting (Red): Fits 2017-2021 Honda Civic Sport & Si, 2017-2021 Civic Type-R FK8, and all variant models including RHD and international models. This is the first checkpoint before any install: if your car is outside these listed applications, the catalog does not confirm fitment.

Genuine Honda 2016-2021 Civic / Type-R Interior Ambient Illumination Lighting (Red) - Genuine Honda 2016-2021 Civic / Type-R Interior Ambient Illumination Lighting (Red): Red LED soft light illuminates the driver and passenger footwells and integrates with interior lights. The integration with interior lights is the key wiring behavior to understand, because the kit is intended to follow the car's existing interior lighting rather than operate as a separate always-on circuit.
- Genuine Honda 2016-2021 Civic / Type-R Interior Ambient Illumination Lighting (Red): Factory Interior Illumination Lighting, Honda Part Number 08E10-TEA-100A. Use the part number to verify the accessory and to look up the correct factory instructions for your model year and trim.
Wiring basics: what the catalog confirms and what it does not
The supplied information confirms that the red LED soft light integrates with interior lights. That tells you the intended behavior: the footwell glow should follow the car's interior lighting rather than stay on independently. It does not provide a wiring diagram, connector locations, fuse taps, or a step-by-step electrical procedure. Because those details are not in the supplied record, do not guess at wire colors or splice points. Use the factory Honda installation instructions for your specific model year and trim, and treat any third-party wiring advice as unverified until you can cross-check it.
For a 10th-gen Civic interior lighting wiring job, the practical approach is to identify the interior lighting circuit the kit is meant to connect to, confirm the connector type and pinout from the factory documentation, and test the circuit before final reassembly. If you are not comfortable tracing and testing automotive circuits, a qualified installer is the safer choice. The catalog does not confirm whether the kit is plug-and-play or requires splicing, so plan for either until the factory instructions tell you otherwise.
A supported install sequence for the footwell lights
These steps cover the parts of the job the catalog supports. They are not a substitute for the factory instructions, which should guide the electrical connections.
- Verify fitment and part number: Confirm your car is a 2017-2021 Civic Sport, Si, or Type R FK8, or another listed variant, and that the kit is the genuine Honda part 08E10-TEA-100A.
- Locate the footwell mounting points: The kit is designed to illuminate the driver and passenger footwells. Identify where the lamp housings are intended to sit before running any wiring.
- Plan the wiring route to the interior lighting circuit: The kit integrates with interior lights, so route wiring toward the circuit the factory instructions specify. Do not invent a connection point; use the factory diagram for your trim.
- Test before final reassembly: Once connected per the factory instructions, check that the footwell lights follow the interior lighting behavior. If they do not, stop and recheck the connection rather than forcing a different circuit.
Civic Type R ambient light setup: what is different
The catalog lists the FK8 Type R alongside the Sport and Si for the same 2017-2021 range, so the kit is intended to fit the Type R as well. The supplied information does not describe any Type R-specific wiring differences, mounting differences, or trim removal steps. If you drive a Type R, use the factory instructions for the FK8 and confirm the connection point for that model rather than assuming the Sport or Si procedure carries over exactly. The same part number applies, but the car's interior trim and circuit layout should be verified against the documentation for your specific model.
Care that keeps the red glow looking factory
The catalog does not include a care schedule or cleaning procedure for this kit. The following are general ownership practices, not manufacturer instructions.
- Keep the lamp lenses clean: Dust and smudges on the footwell lenses can dull the soft red output. Wipe them gently during interior cleaning rather than scrubbing.
- Avoid harsh chemicals near the housings: Interior cleaners and protectants can leave residue on plastic lenses. Apply products to a cloth first and keep them off the lamp surfaces.
- Watch for flicker or intermittent operation: Because the kit integrates with interior lights, a flicker or a light that stops following the interior circuit can point to a connection issue. Have the wiring checked rather than adding a separate switch.
- Protect the wiring during other interior work: If you remove trim panels or the glovebox for other jobs, check that the ambient lighting wiring is still routed and secured as installed.
What to confirm before you buy
The catalog price is USD 84.50 against a comparison price of USD 130.00, and the kit is listed as a standard variant. Before ordering, confirm three things: your Civic is within the listed 2017-2021 Sport, Si, Type R FK8, or variant applications; you have the factory instructions for your model year and trim; and you are prepared to verify the interior lighting connection rather than guess at it. The catalog does not confirm bulb wattage, color temperature, harness length, or whether additional hardware is included, so those details should come from the factory documentation or the part listing itself. If your car falls outside the listed fitment, the catalog does not confirm compatibility, and it is worth checking with a Honda parts specialist before purchase.


